Equaphon is dedicated to the manufacturing, distrubution, representation of audio, video and lighting products.
Equaphon has a new shop Starting from November 2006, Equaphon is a NEC Master Dealer for its line of multimedia projectors, guided to end and corporate clients and distributors. It is also importer and official distributor for NEC Projectors.
Recently Equaphon - with NEC’s support- opened a new shop located in Paraná 147, Buenos Aires, where the VT Series multipurpose projectors line will be marketed together with the NP professional projectors line for rental companies and facilities such as professional studios or auditories. VT Series: SVGA/XGA Projectors; Brightness: 1600/2000/2500 ANSI Lumens; Excellent design and exclusive benefits. NP Series: XGA Projectors; Brightness: 3500/4000 ANSI Lumens; Versatility and innovative benefits; Wide connectivity. For more information, the new shop can be contacted at +54 (0)11 4372-7236 | 4372-3698 or write to parana@equaphon.com.ar
The ProRack House consoles by APB-Dynasonics have a series of features and good performance in only 10 rack units.
The chassis design allows 3 adjustable angles for connectors: this allows the in and out connectors to keep such position so the console could be used in rack, in angle or on a desk. The ProRack series is designed based on the already known Spectra consoles. Main features: - 12 mono input channels and 4 dual mono/stereo. 20 mic pre-amplifiers in total - 48V Phantom Power switchers, mic/line, pad, and polarity. - Variable high pass filter (20-400 Hz) 12 dB/oct in every input channel (mono and stereo). - High and low EQs and two parametric EQs for middle with 1/ wideband (mono channels). - High and low EQs and one parametric EQ for middle (stereo channel). - 6 aux sends, pre-post switch. Pre-faders can be switched between pre or post EQ. Aux 5 and 6 can be turned into stereo. - All outputs (L, R, Center, Mono, Sub Groups and Aux) are balanced XLR, with Sub In and TRS insertion points. - L, R, Center y Mono outputs can be chosen to work in line level or mic level. - Mute and PFL/AFL indicators are lighted in every channel. Faders are 100mm, and the signal level is shown in a 6-segment LED bar. If you want to check their performance and features, you can stop by any of the company's shops. For more information, get in contact with them.
Increasing the K Series of high power professional amplifiers Powersoft presented two boards, which can be inserted internally into a slot specially provided for them.
One of them, the KETH, is a board that allows us to use this series with the CobraNet technology which is being imposed especially in the North American market as the standard for data transmission, control and audio signals. The other board in the K Series is the KDSP allowing audio signal processing. It uses a high quality DSP and AD/DA converters. The DSP is an Analog Devices SHARC DSP that has all the algorithms needed for crossover, 50 band parametric EQ or phase correction, delay and dynamic processing. Another news is the incorporation of two new models into the DIGAM L line: the LD 2004 and the LD 3004. The first one delivers a 4 ohm 1,000W + 1,000W power and the second one a 4 ohm 1,500W + 1,500W, both models complete the series together with the 700W + 700W LD 1404 and the 4 channels amplifier LQ2804 providing 700W at 4 ohm. Last but not least, they launched two new power modules for acoustic cabinet’s amplification. They are the DigiMod 1500 (750W + 750W at 4 ohm), delivering 1,500W at 8 ohm in bridge configuration and the DigiMod 2000HV (1,000W + 1,000W at 8 ohm), delivering 2,000W at 16 ohm in bridge configuration. These new models complete the amplifying modules line formed by the DigiMod 500-1000, DigiMod 1000NPS and DigiPower 3600. All this series has switching source and Class D amplification. They weight 1.1Kg. and they are used by the most important international manufacturers of self-powered loudspeakers. Undoubtedly, Powersoft is an international leader company in the application of these new Technologies that in the future will be the standard in professional amplification, with the vantage of having up to 10 years of experience in innovative ideas and manufacturing professional audio products that are used in more than 50 countries worldwide.
The cabinet V5/20 Touring Series, is a complete system of 3 acoustic routes for linear adjustments, bi-amplifiable, the mid/high range with passive splitter. that allows a high power handling.
The BF system is made up of woofer of 15” like direct radiator. The FM are handled by two loudspeakers of high sensitivity of 8” with coil of 2”, the high frequency are handled by two driver of 1” of NEODYMIUM mounted in reflective waveguides. They can be used in formation from four units to obtain the advantages of the Line Array system. The system was designed to be used in medium spaces to bigger ones, in outdoors or indoors. Where it’s necessary a reinforcement of sub extra LF, it can be added the sub-low Systems of Touring Series Concerto SUB. The V5 Line is a constructed trapezoidal broad ribbon cabinet, with multiple structural reinforcements it has a system of rigging that allows hung between boxes and a correct adjustment of the dispersion in height. New technology in cover of cabinets; the acoustic cabinets of the Touring Series are completely covered with painting with polyurethane, on approval of inclemency, has but the high resistance to rayon and deformations.
K3 represents the latest news about the flagship Digam K series.
Offering the same sonic performances of the other models of the K series, thanks to a perfect hardware tuning, it offers the best price/performance ratio with an even more compact enclosure. A couple of K3s will grant much more flexibility, reliability and performances than any other professional 4 channels amplifier, in the same rack space and price range. Specific features: 2x 2.800 W/2 Ohm 2x 2.600 W/4 Ohm 2x 1.400 W-8 Ohm Dimensions: 1 RU, depth 360 mm (120 mm less than other K series models) Weight: 8 Kg - 17,6 lbs Power Consumption: 1500 VA / 400 Vac Mains over voltage Tolerant XLR female Neutrik® input connectors XLR male Neutrik® connectors for link capability.
